AISI 202 Stainless Steel Pipe is a type of austenitic stainless steel known for its lower nickel content compared to the popular 300 series, such as 304. It is part of the 200 series family, which was developed primarily as an economic alternative with reasonable corrosion resistance and strength.
Composition:
The typical chemical composition of 202 Stainless Steel includes:
- Chromium (Cr): About 17% to 19%, which provides basic corrosion resistance.
- Nickel (Ni): A relatively low amount, usually around 4% to 6%, which helps maintain its austenitic structure and enhances corrosion resistance.
- Manganese (Mn): Higher amounts, often ranging from 5.5% to 7.5%, substituting some of the nickel content to reduce costs.
- Carbon (C), Silicon (Si), Phosphorus (P), and Sulfur (S) in trace amounts.
Characteristics:
1. Corrosion Resistance: Offers moderate corrosion resistance, particularly in less aggressive environments and indoors. However, it's not as resistant as 304 or 316 grades, especially when exposed to acidic or chloride-containing conditions.
2. Strength: Due to the higher manganese content, 202 Stainless Steel exhibits slightly higher mechanical strength than the standard 304 grade.
3. Formability: Possesses good formability and can be readily shaped into pipes using various forming methods.
4. Cost-Effectiveness: The reduced nickel content makes it more affordable compared to other austenitic stainless steels.
5. Weldability: Can be welded using conventional fusion welding techniques; however, precautions should be taken to minimize potential hot cracking issues.
Use:
1. Architecture and Construction: For decorative purposes, indoor structural components, and water supply systems where moderate corrosion resistance is sufficient.
2. Kitchenware and Appliances: In moderately corrosive environments within the food industry, for products like utensils, sinks, and certain kitchen equipment.
3. Consumer Goods: Used in the manufacturing of household appliances, furniture, and automotive trim parts that require a balance between cost and durability.
4. Industrial Applications: For non-critical applications involving mild chemicals, where high-stress levels are not present, and in environments with minimal exposure to chlorides or harsh acids.
5. Pipeline Systems: In internal piping networks where there is no direct contact with highly corrosive fluids, such as in air conditioning systems or water distribution lines.
In summary, AISI 202 Stainless Steel Pipe is a cost-effective material with moderate corrosion resistance and strength suitable for applications where the performance requirements are less demanding than those met by higher-grade stainless steels. While not as resilient as the 300 series, its properties make it a practical choice for a wide range of industrial, architectural, and consumer product applications.
| Product Name | 202 Stainless Steel Pipe/Tube |
| Type | Seamless and welding pipe/tube |
| Shape | Round pipe, Square pipe, Rectangular pipe |
| Material | 200/300/400/900 series,duplex |
| 201, 202, 203, 204, 301, 304, 304L, 314, 316, 316L, 310S 309S, 409, 410, 420, 430, 631, 904L,etc | |
| Standard | JIS/SUS/GB/DIN/ASTM/AISI/En |
| Surface | Pickling/Polished/Satin/Hairline/Mirror Finish |
| Package | clients' requirement and Standard export sea-worthy packing |
| MOQ | 1 ton |
Available Size Range
| Dimension | Range |
| Outside Diameter |
6mm-630mm(seamless pipe) 9.5mm-1200mm(welding pipe) or as customer's requirement |
| Wall Thickness |
2.5mm-30mm(seamless pipe) 20.5mm-20mm(welding pipe) or as customer's requirement |
| Length | 6M & as customer's requirement |
Chemical Properties of Frequently-used :
| UNS | ASTM | EN | JIS | C% | Mn% | P% | S% | Si% | Cr% | Ni% | Mo% |
| S20100 | 201 | 1.4372 | SUS201 | ≤0.15 | 5.5-7.5 | ≤0.06 | ≤0.03 | ≤1.00 | 16.0-18.0 | 3.5-5.5 | - |
| S20200 | 202 | 1.4373 | SUS202 | ≤0.15 | 7.5-10.0 | ≤0.06 | ≤0.03 | ≤1.00 | 17.0-19.0 | 4.0-6.0 | - |
| S30100 | 301 | 1.4319 | SUS301 | ≤0.15 | ≤2.00 | ≤0.045 | ≤0.03 | ≤1.00 | 16.0-18.0 | 6.0-8.0 | - |
| S30400 | 304 | 1.4301 | SUS304 | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.03 | ≤0.75 | 18.0-20.0 | 8.0-10.5 | - |
| S30403 | 304L | 1.4306 | SUS304L | ≤0.03 | ≤2.00 | ≤0.045 | ≤0.03 | ≤0.75 | 18.0-20.0 | 8.0-12.0 | - |
| S30908 | 309S | 1.4833 | SUS309S | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.03 | ≤0.75 | 22.0-24.0 | 12.0-15.0 | - |
| S31008 | 310S | 1.4845 | SUS310S | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.03 | ≤1.50 | 24.0-26.0 | 19.0-22.0 | - |
| S31600 | 316 | 1.4401 | SUS316 | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.03 | ≤0.75 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 |
| S31603 | 316L | 1.4404 | SUS316L | ≤0.03 | ≤2.00 | ≤0.045 | ≤0.03 | ≤0.75 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 |
| S31703 | 317L | 1.4438 | SUS317L | ≤0.03 | ≤2.00 | ≤0.045 | ≤0.03 | ≤0.75 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 |
| S32100 | 321 | 1.4541 | SUS321 | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.03 | ≤0.75 | 17.0-19.0 | 9.0-12.0 | - |
| S34700 | 347 | 1.455 | SUS347 | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.03 | ≤0.75 | 17.0-19.0 | 9.0-13.0 | - |
| S40500 | 405 | 1.4002 | SUS405 | ≤0.08 | ≤1.00 | ≤0.04 | ≤0.03 | ≤1.00 | 11.5-14.5 | ≤0.60 | - |
| S40900 | 409 | 1.4512 | SUS409 | ≤0.08 | ≤1.00 | ≤0.045 | ≤0.03 | ≤1.00 | 10.5-11.75 | ≤0.50 | - |
| S43000 | 430 | 1.4016 | SUS430 | ≤0.12 | ≤1.00 | ≤0.040 | ≤0.03 | ≤0.75 | 16.0-18.0 | ≤0.60 | - |
| S43400 | 434 | 1.4113 | SUS434 | ≤0.12 | ≤1.00 | ≤0.040 | ≤0.03 | ≤1.00 | 16.0-18.0 | - | - |
| S44400 | 444 | 1.4521 | SUS444L | ≤0.025 | ≤1.00 | ≤0.045 | ≤0.03 | ≤1.00 | 17.5-19.5 | ≤1.00 | - |
| S40300 | 403 | - | SUS403 | ≤0.15 | 5.5-7.5 | ≤0.04 | ≤0.03 | ≤0.50 | 11.5-13.0 | ≤0.60 | - |
| S410000 | 410 | 1.40006 | SUS410 | ≤0.15 | ≤1.00 | ≤0.035 | ≤0.03 | ≤1.00 | 11.5-13.5 | ≤0.60 | ≤1.00 |
| S42000 | 420 | 1.4021 | SUS420J1 | 0.16~0.25 | ≤1.00 | ≤0.04 | ≤0.03 | ≤1.00 | 12.0-14.0 | ≤0.75 | ≤1.00 |
| S440A | 440A | 1.4028 | SUS440A | 0.60~0.75 | ≤1.00 | ≤0.04 | ≤0.03 | ≤1.00 | 16.0-18.0 | - | ≤0.75 |
| S32750 | SAD2507 | 1.441 | ≤0.03 | ≤1.2 | ≤0.035 | ≤0.02 | ≤0.80 | 24.0-26.0 | 6.0-8.0 | 3.0-5.0 | |
| S31803 | SAF2205 | 1.4462 | ≤0.03 | ≤2.0 | ≤0.03 | ≤0.02 | ≤1.00 | 21.0-23.0 | 4.0-6.5 | 2.5-3.5 | |
| N08904 | 904L | 1.4539 | ≤0.0.3 | ≤2.0 | ≤0.035 | ≤0.03 | ≤1.00 | 18.0-20.0 | 23.0-25.0 | 3.0-4.0 |
Stainless Steel Material Properties:
| Type No. | Tensile Strength, ksi | Yield Strength, ksi | Elongation in 2 inches, % | Reduction of Area, % | Brinell Hardness |
| 301 | 110 | 40 | 60 | 70 | 165 |
| 302 | 90 | 40 | 55 | 70 | 150 |
| 303 | 90 | 35 | 50 | 55 | 160 |
| 304 | 85 | 35 | 55 | 70 | 150 |
| 304L | 80 | 30 | 55 | 70 | 140 |
| 316 | 85 | 35 | 60 | 70 | 150 |
| 316L | 78 | 30 | 55 | 65 | 145 |
| 321 | 85 | 35 | 55 | 65 | 150 |
| 410 | 75 | 40 | 35 | 70 | 155 |
| 416 | 75 | 40 | 30 | 65 | 155 |
| 420 | 95 | 50 | 25 | - | 241 |
| 430F | 80 | 45 | 25 | 50 | 165 |
| 15-5 | 160 | 145 | 15 | - | 330 |
| 17-4 (Condition A) | 150 | 110 | 10 | 45 | 332 |
